diff --git a/src/qt/locale/bitcoin_fa.ts b/src/qt/locale/bitcoin_fa.ts index 2bf33fcbc..469b4c02a 100644 --- a/src/qt/locale/bitcoin_fa.ts +++ b/src/qt/locale/bitcoin_fa.ts @@ -1,4 +1,41 @@ - + + + + + AddPeerDialog + + Add Peer + + + + Enter the peer details below. + + + + Be careful! Do not blindly trust anyone that tells you to add their node. + + + + Enter the peer's address + + + + Enter the peer's port + + + + Add! + + + + Please enter an address. + + + + Please enter a valid peer address. + + + AddressBookPage @@ -63,7 +100,7 @@ These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. - اینها آدرس های شما برای فرستادن پرداخت هاست. همیشه قبل از فرستادن سکه ها مقدار و آدرس دریافت کننده را چک کنید. + اینها آدرس های شما برای فرستادن پرداخت هاست. همیشه قبل از فرستادن سکه ها مقدار و آدرس دریافت کننده را چک کنید. &Copy Address @@ -85,7 +122,23 @@ Exporting Failed صدور موفق نبود - + + These are your Dogecoin addresses for sending payments. Always check the amount and the receiving address before sending coins. + + + + These are your Dogecoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. + + + + Comma separated file (*.csv) + + + + There was an error trying to save the address list to %1. Please try again. + + + AddressTableModel @@ -149,7 +202,7 @@ Confirm wallet encryption - تأیید رمزنگاری کیف پول + تایید رمزنگاری کیف پول Are you sure you wish to encrypt your wallet? @@ -183,6 +236,30 @@ Warning: The Caps Lock key is on! هشدار: کلید Caps Lock روشن است! + + Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>. + + + + Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR DOGECOINS</b>! + + + + %1 will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your dogecoins from being stolen by malware infecting your computer. + + + + IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. + + + + The supplied passphrases do not match. + + + + The passphrase entered for the wallet decryption was incorrect. + + BanTableModel @@ -299,7 +376,7 @@ Send coins to a Dogecoin address - ارسال وجه به نشانی بیت‌کوین + ارسال وجه به نشانی دوج‌کوین Backup wallet to another location @@ -323,7 +400,7 @@ Dogecoin - بیت‌کوین + دوج‌کوین Wallet @@ -351,11 +428,11 @@ Sign messages with your Dogecoin addresses to prove you own them - برای اثبات اینکه پیام‌ها به شما تعلق دارند، آن‌ها را با نشانی بیت‌کوین خود امضا کنید + برای اثبات اینکه پیام‌ها به شما تعلق دارند، آن‌ها را با نشانی دوج‌کوین خود امضا کنید Verify messages to ensure they were signed with specified Dogecoin addresses - برای حصول اطمینان از اینکه پیام با نشانی بیت‌کوین مشخص شده امضا است یا خیر، پیام را شناسایی کنید + برای حصول اطمینان از اینکه پیام با نشانی دوج‌کوین مشخص شده امضا است یا خیر، پیام را شناسایی کنید &File @@ -375,7 +452,7 @@ Request payments (generates QR codes and dogecoin: URIs) - درخواست پرداخت ( تولید کد کیوار و ادرس بیت کوین) + درخواست پرداخت ( تولید کد کیوار و ادرس دوج‌کوین) Show the list of used sending addresses and labels @@ -387,7 +464,7 @@ Open a dogecoin: URI or payment request - بازکردن یک بیت کوین: آدرس یا درخواست پرداخت + بازکردن یک بیت‌کوین: آدرس یا درخواست پرداخت &Command-line options @@ -395,7 +472,9 @@ %n active connection(s) to Dogecoin network - %n ارتباط فعال با شبکهٔ بیت‌کوین + + %n ارتباط فعال با شبکهٔ دوج‌کوین + Processing blocks on disk... @@ -403,7 +482,9 @@ Processed %n block(s) of transaction history. - پردازش %n بلاک از تاریخچه ی تراکنش ها + + پردازش %n بلاک از تاریخچه ی تراکنش ها + %1 behind @@ -483,7 +564,66 @@ Wallet is <b>encrypted</b> and currently <b>locked</b> کیف پول <b>رمزنگاری شده</b> است و هم‌اکنون <b>قفل</b> است - + + Runaway exception + + + + A fatal error occurred. Dogecoin can no longer continue safely and will quit. + + + + &Print paper wallets + چاپ کیف‌پول کاغذی + + + Print paper wallets + + + + &Import Private Key... + &وارد کردن کلید خصوصی... + + + Import a Dogecoin private key + + + + Show the %1 help message to get a list with possible Dogecoin command-line options + + + + %1 client + + + + Syncing Headers (%1%)... + در حال همگام سازی (%1%) ... + + + Indexing blocks on disk... + + + + Connecting to peers... + در تلاش برای اتصال... + + + HD key generation is <b>enabled</b> + ساخت کلید اچ.دی. <b>فعال</b> است + + + HD key generation is <b>disabled</b> + ساخت کلید اچ.دی. <b>غیرفعال</b> است + + + + ClientModel + + Network Alert + + + CoinControlDialog @@ -548,7 +688,7 @@ Confirmed - تأیید شده + تایید شده Copy address @@ -610,6 +750,30 @@ (change) (تغییر) + + Dust: + + + + Copy after fee + + + + Copy dust + + + + This label turns red if any recipient receives an amount smaller than the current dust threshold. + + + + Can vary +/- %1 koinu(s) per input. + + + + change from %1 (%2) + + EditAddressDialog @@ -642,18 +806,30 @@ ویرایش آدرس قرستنده - The entered address "%1" is not a valid Dogecoin address. - نشانی وارد شده "%1" یک نشانی معتبر بیت‌کوین نیست. + The entered address "%1" is not a valid Dogecoin address. + نشانی وارد شده "%1" یک نشانی معتبر دوج‌کوین نیست. - The entered address "%1" is already in the address book. + The entered address "%1" is already in the address book. نشانی وارد شده «%1» در حال حاضر در دفترچه وجود دارد. Could not unlock wallet. نمی‌توان کیف پول را رمزگشایی کرد. - + + The label associated with this address list entry + + + + The address associated with this address list entry. This can only be modified for sending addresses. + + + + New key generation failed. + + + FreespaceChecker @@ -708,7 +884,7 @@ گزینه‌های رابط کاربری: - Set language, for example "de_DE" (default: system locale) + Set language, for example "de_DE" (default: system locale) زبان را تنظیم کنید؛ برای مثال «de_DE» (پیشفرض: زبان سیستم) @@ -723,7 +899,78 @@ Show splash screen on startup (default: %u) نمایش پنجرهٔ خوشامدگویی در ابتدای اجرای برنامه (پیش‌فرض: %u) - + + Choose data directory on startup (default: %u) + + + + Reset all settings changed in the GUI + + + + + ImportKeysDialog + + Import Private Key + + + + &Import Private Key + + + + Private Key: + + + + Private key to import into your wallet + + + + Label for this private key in your wallet + + + + Label (optional): + + + + Rescan + + + + Reset all key management options to default. + + + + &Reset + + + + &Import + + + + &Cancel + &لغو + + + Invalid private key; please check and try again! + + + + Invalid address generated from private key; please check and try again! + + + + Failed to add private key. + + + + Rescanning... + اسکان مجدد + + Intro @@ -748,9 +995,33 @@ %n GB of free space available - %n گیگابایت فضا موجود است + + %n گیگابایت فضا موجود است + - + + As this is the first time the program is launched, you can choose where %1 will store its data. + + + + %1 will download and store a copy of the Dogecoin block chain. At least %2GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory. + + + + Error: Specified data directory "%1" cannot be created. + + + + (of %n GB needed) + + + + + + Choose data directory + + + ModalOverlay @@ -785,7 +1056,23 @@ Hide پنهان کردن - + + Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the dogecoin network, as detailed below. + + + + Attempting to spend dogecoins that are affected by not-yet-displayed transactions will not be accepted by the network. + + + + Number of blocks left + + + + Unknown. Syncing Headers (%1)... + + + OpenURIDialog @@ -804,7 +1091,11 @@ Select payment request file انتخاب فایل درخواست پرداخت - + + Select payment request file to open + + + OptionsDialog @@ -853,7 +1144,7 @@ Automatically open the Dogecoin client port on the router. This only works when your router supports UPnP and it is enabled. - باز کردن خودکار درگاه شبکهٔ بیت‌کوین روی روترها. تنها زمانی کار می‌کند که روتر از پروتکل UPnP پشتیبانی کند و این پروتکل فعال باشد. + باز کردن خودکار درگاه شبکهٔ دوج‌کوین روی روترها. تنها زمانی کار می‌کند که روتر از پروتکل UPnP پشتیبانی کند و این پروتکل فعال باشد. Map port using &UPnP @@ -917,7 +1208,7 @@ &OK - &تأیید + &تایید &Cancel @@ -933,7 +1224,7 @@ Confirm options reset - تأییدِ بازنشانی گزینه‌ها + تاییدِ بازنشانی گزینه‌ها This change would require a client restart. @@ -943,6 +1234,102 @@ The supplied proxy address is invalid. آدرس پراکسی داده شده صحیح نیست. + + &Start %1 on system login + + + + Size of &database cache + + + + Number of script &verification threads + + + + (0 = auto, <0 = leave that many cores free) + + + + Whether to show coin control features or not. + + + + Enable coin &control features + + + + If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. + + + + &Spend unconfirmed change + + + + Connect to the Dogecoin network through a SOCKS5 proxy. + + + + &Connect through SOCKS5 proxy (default proxy): + + + + IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) + + + + Used for reaching peers via: + + + + Shows, if the supplied default SOCKS5 proxy is used to reach peers via this network type. + + + + Connect to the Dogecoin network through a separate SOCKS5 proxy for Tor hidden services. + + + + Use separate SOCKS5 proxy to reach peers via Tor hidden services: + + + + &Hide the icon from the system tray. + + + + Hide tray icon + + + + Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu. + + + + The user interface language can be set here. This setting will take effect after restarting %1. + + + + Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. + + + + Third party transaction URLs + + + + Active command-line options that override above options: + + + + Client restart required to activate changes. + + + + Client will be shut down. Do you want to proceed? + + OverviewPage @@ -952,7 +1339,7 @@ The displayed information may be out of date. Your wallet automatically synchronizes with the Dogecoin network after a connection is established, but this process has not completed yet. - اطلاعات نمایش‌داده شده ممکن است قدیمی باشند. بعد از این که یک اتصال با شبکه برقرار شد، کیف پول شما به‌صورت خودکار با شبکهٔ بیت‌کوین همگام‌سازی می‌شود. اما این روند هنوز کامل نشده است. + اطلاعات نمایش‌داده شده ممکن است قدیمی باشند. بعد از این که یک اتصال با شبکه برقرار شد، کیف پول شما به‌صورت خودکار با شبکهٔ دوج‌کوین همگام‌سازی می‌شود. اما این روند هنوز کامل نشده است. Available: @@ -968,7 +1355,7 @@ Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance - مجموع تراکنش‌هایی که هنوز تأیید نشده‌اند؛ و هنوز روی تراز علی‌الحساب اعمال نشده‌اند + مجموع تراکنش‌هایی که هنوز تایید نشده‌اند؛ و هنوز روی تراز علی‌الحساب اعمال نشده‌اند Immature: @@ -998,17 +1385,395 @@ Recent transactions تراکنش های اخیر - + + Unconfirmed transactions to watch-only addresses + + + + Mined balance in watch-only addresses that has not yet matured + + + + Current total balance in watch-only addresses + + + + Watch-only: + + + + Your current balance in watch-only addresses + + + + Helpful tip of the day: + نکته روز: + + + Tip + + + + Never share your wallet.dat file/your private key with anyone + هرگز فایل والت یا کلید خصوصی خود را به کسی ندهید + + + For more advanced settings use the console in 'Help' -> 'Debug Window' + + + + Encrypt your wallet with a strong passphrase for maximum security + + + + Make sure to keep your wallet updated. + + + + Backup your private key to recover your coins, using 'File' > 'Backup Wallet' + + + + Always do your own research before using an external cryptocurrency service + + + + Never share your private key to an untrustworthy person. + + + + Who own the private keys own the coins. + + + + To see ongoing development and contribute, checkout Dogecoin repository on GitHub! + + + + Services that claim to double your dogecoins are always ponzi schemes + + + + + PaperWalletDialog + + Print Your Paper Wallets + + + + Very New Address + + + + So Print + + + + Many Wallets? + + + + 1 + + + + 2 + + + + 3 + + + + 4 + + + + 5 + + + + 6 + + + + 7 + + + + 8 + + + + 9 + + + + 10 + + + + 11 + + + + 12 + + + + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html> + + + + Public Key: + + + + Close + + + + Warning: Network Activity Detected + + + + It is recommended to disconnect from the internet before printing paper wallets. Even though paper wallets are generated on your local computer, it is still possible to unknowingly have malware that transmits your screen to a remote location. It is also recommended to print to a local printer vs a network printer since that network traffic can be monitored. Some advanced printers also store copies of each printed document. Proceed with caution relative to the amount of value you plan to store on each address. + + + + Error encoding Address into QR Code. + + + + Error encoding private key into QR Code. + + + + Printing Error + + + + failed to open file, is it writable? + + + + Load Paper Wallets + + + + The paper wallet printing process has begun.<br/>Please wait for the wallets to print completely and verify that everything printed correctly.<br/>Check for misalignments, ink bleeding, smears, or anything else that could make the private keys unreadable.<br/>Now, enter the number of DOGE you wish to send to each wallet: + + + + Paper wallet %1 + + + + <b>%1</b> to Paper Wallet <span style='font-family: monospace;'>%2</span> + + + + Send Coins + ارسال سکه + + + The recipient address is not valid, please recheck. + + + + The amount to pay must be larger than 0 + + + + The amount exceeds your balance. + + + + The total exceeds your balance when the transaction fee is included + + + + Duplicate address found, can only send to each address once per send operation. + + + + Transaction creation failed! + + + + Are you sure you want to send? + + + + added as transaction fee + + + + Total Amount %1 (= %2) + + + + or + + + + Confirm send coins + + + + The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. + + + PaymentServer Invalid payment request. درخواست پرداخت نامعتبر. - + + Payment request error + + + + Cannot start dogecoin: click-to-pay handler + + + + URI handling + + + + Payment request fetch URL is invalid: %1 + + + + Invalid payment address %1 + + + + URI cannot be parsed! This can be caused by an invalid Dogecoin address or malformed URI parameters. + + + + Payment request file handling + + + + Payment request file cannot be read! This can be caused by an invalid payment request file. + + + + Payment request rejected + + + + Payment request network doesn't match client network. + + + + Payment request expired. + + + + Payment request is not initialized. + + + + Unverified payment requests to custom payment scripts are unsupported. + + + + Requested payment amount of %1 is too small (below discard threshold). + + + + Refund from %1 + + + + Payment request %1 is too large (%2 bytes, allowed %3 bytes). + + + + Error communicating with %1: %2 + + + + Payment request cannot be parsed! + + + + Bad response from server %1 + + + + Network request error + + + + Payment acknowledged + + + PeerTableModel - + + NodeId + + + + Node/Service + + + + User Agent + + + + Ping + + + + Bytes Sent + + + + Bytes Received + + + + + PeerTools + + Error: Peer-to-peer functionality missing or disabled + + + + Attempted to one try node. + + + + Error: Node already added + + + + Node not found in connected nodes + + + + Disconnected the node: + + + + Returned OK. + + + QObject @@ -1017,7 +1782,7 @@ Enter a Dogecoin address (e.g. %1) - یک آدرس بیت‌کوین وارد کنید (مثلاً %1) + یک آدرس دوج‌کوین وارد کنید (مثلاً %1) %1 d @@ -1051,13 +1816,101 @@ %1 and %2 %1 و %2 - + + %1 didn't yet exit safely... + + + + %1 B + %1 بایت + + + %1 TB + + + + %1 GB + %1 گیگابایت + + + %1 MB + %1 مگابایت + + + %1 KB + %1 کیلوبایت + + + %n second(s) + + + + + + %n minute(s) + + + + + + %n hour(s) + + + + + + %n day(s) + + + + + + %n week(s) + + + + + + %n year(s) + + + + + QObject::QObject - + + Error: Specified data directory "%1" does not exist. + + + + Error: Cannot parse configuration file: %1. Only use key=value syntax. + + + + Error: %1 + + + QRImageWidget - + + &Save Image... + &ذخیره عکس... + + + &Copy Image + + + + Save QR Code + + + + PNG Image (*.png) + + + RPCConsole @@ -1240,6 +2093,158 @@ Unknown ناشناخته + + User Agent + + + + Using BerkeleyDB version + + + + Datadir + + + + Current number of transactions + + + + Open the %1 debug log file from the current data directory. This can take a few seconds for large log files. + + + + Decrease font size + + + + Increase font size + + + + &Network Traffic + + + + &Clear + + + + &Peers + + + + Connected peers + + + + Add new peer + + + + Remove peer + + + + One try peer + + + + Banned peers + + + + Select a peer to view detailed information. + + + + Whitelisted + + + + Direction + + + + Starting Block + + + + Synced Headers + + + + Synced Blocks + + + + Ban Score + + + + The duration of a currently outstanding ping. + + + + Min Ping + + + + Time Offset + + + + &Disconnect + + + + &Unban + + + + Welcome to the %1 RPC console. + + + + WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramification of a command. + + + + Network activity disabled + + + + Error + خطا + + + Remove Peer + + + + Are you sure you want to remove the peer: + + + + No peer was selected. + + + + (node id: %1) + + + + via %1 + + + + Inbound + + + + Outbound + + ReceiveCoinsDialog @@ -1287,6 +2292,46 @@ Copy amount کپی مقدار + + Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before. + + + + R&euse an existing receiving address (not recommended) + + + + An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Dogecoin network. + + + + An optional label to associate with the new receiving address. + + + + An optional amount to request. Leave this empty or zero to not request a specific amount. + + + + &Request payment + + + + Requested payments history + + + + Show the selected request (does the same as double clicking an entry) + + + + Copy URI + + + + Copy message + + ReceiveRequestDialog @@ -1310,7 +2355,39 @@ Label برچسب - + + Copy &URI + + + + Request payment to %1 + + + + Payment information + + + + URI + + + + Amount + مبلغ + + + Message + + + + Resulting URI too long, try to reduce the text for label / message. + + + + Error encoding URI into QR Code. + + + RecentRequestsTableModel @@ -1321,7 +2398,27 @@ (no label) (بدون برچسب) - + + Date + تاریخ + + + Message + + + + (no message) + + + + (no amount requested) + + + + Requested + + + SendCoinsDialog @@ -1394,11 +2491,11 @@ normal - نرمال + نرمال fast - سریع + سریع Send to multiple recipients at once @@ -1418,11 +2515,11 @@ Balance: - تزار: + تراز: Confirm the send action - عملیات ارسال را تأیید کنید + عملیات ارسال را تایید کنید S&end @@ -1452,6 +2549,146 @@ (no label) (بدون برچسب) + + Coin Control Features + + + + Dust: + + + + If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. + + + + Custom change address + + + + Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until your have validated the complete chain. + + + + Warning: Fee estimation is currently not possible. + + + + collapse fee-settings + + + + If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte. + + + + Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for dogecoin transactions than the network can process. + + + + (read the tooltip) + + + + Priority: + + + + low + + + + high + + + + Copy after fee + + + + Copy dust + + + + %1 to %2 + + + + Are you sure you want to send? + + + + added as transaction fee + + + + Total Amount %1 + + + + or + + + + Confirm send coins + + + + The recipient address is not valid. Please recheck. + + + + The amount to pay must be larger than 0. + + + + The amount exceeds your balance. + + + + The total exceeds your balance when the %1 transaction fee is included. + + + + Duplicate address found: addresses should only be used once each. + + + + Transaction creation failed! + + + + The transaction was rejected with the following reason: %1 + + + + A fee higher than %1 is considered an absurdly high fee. + + + + Payment request expired. + + + + Pay only the required fee of %1 + + + + Warning: Invalid Dogecoin address + + + + Warning: Unknown change address + + + + Confirm custom change address + + + + The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure? + + SendCoinsEntry @@ -1477,7 +2714,7 @@ The Dogecoin address to send the payment to - نشانی بیت‌کوین برای ارسال پرداخت به آن + نشانی دوج‌کوین برای ارسال پرداخت به آن Alt+A @@ -1507,22 +2744,58 @@ Memo: یادداشت: - + + Enter a label for this address to add it to the list of used addresses + + + + The fee will be deducted from the amount being sent. The recipient will receive less dogecoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. + + + + S&ubtract fee from amount + + + + A message that was attached to the dogecoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Dogecoin network. + + + + This is an unauthenticated payment request. + + + + This is an authenticated payment request. + + + + Enter a label for this address to add it to your address book + + + SendConfirmationDialog - + + Yes + بله + + ShutdownWindow %1 is shutting down... %1 در حال خاموش شدن است... - + + Do not shut down the computer until this window disappears. + + + SignVerifyMessageDialog Signatures - Sign / Verify a Message - امضاها - امضا / تأیید یک پیام + امضاها - امضا / تایید یک پیام &Sign Message @@ -1530,7 +2803,7 @@ The Dogecoin address to sign the message with - نشانی بیت‌کوین برای امضاء پیغام با آن + نشانی دوج‌کوین برای امضا پیغام با آن Choose previously used address @@ -1582,11 +2855,11 @@ The Dogecoin address the message was signed with - نشانی بیت‌کوین که پیغام با آن امضاء شده + نشانی دوج‌کوین که پیغام با آن امضا شده Verify the message to ensure it was signed with the specified Dogecoin address - برای حصول اطمینان از اینکه پیام با نشانی بیت‌کوین مشخص شده امضا است یا خیر، پیام را شناسایی کنید + برای حصول اطمینان از اینکه پیام با نشانی دوج‌کوین مشخص شده امضا است یا خیر، پیام را شناسایی کنید Verify &Message @@ -1596,7 +2869,67 @@ Reset all verify message fields بازنشانی تمام فیلدهای پیام - + + You can sign messages/agreements with your addresses to prove you can receive dogecoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. + + + + Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction! + + + + Click "Sign Message" to generate signature + + + + The entered address is invalid. + + + + Please check the address and try again. + + + + The entered address does not refer to a key. + + + + Wallet unlock was cancelled. + + + + Private key for the entered address is not available. + + + + Message signing failed. + + + + Message signed. + + + + The signature could not be decoded. + + + + Please check the signature and try again. + + + + The signature did not match the message digest. + + + + Message verification failed. + + + + Message verified. + + + SplashScreen @@ -1604,6 +2937,45 @@ آزمایش شبکه + + TestPeerDialog + + Test Peer + + + + Enter the peer details below. + + + + Be careful! Do not blindly trust anyone that tells you to add their node. + + + + Enter the peer's address + + + + Enter the peer's port + + + + Test! + + + + Please enter an address. + + + + Please enter a valid peer address. + + + + Try Peer + + + TrafficGraphWidget @@ -1613,14 +2985,196 @@ TransactionDesc - + + Open for %n more block(s) + + + + + + Open until %1 + + + + conflicted with a transaction with %1 confirmations + + + + %1/offline + + + + 0/unconfirmed, %1 + + + + in memory pool + + + + not in memory pool + + + + abandoned + + + + %1/unconfirmed + + + + %1 confirmations + + + + Status + + + + , has not been successfully broadcast yet + + + + , broadcast through %n node(s) + + + + + + Date + تاریخ + + + Source + + + + Generated + + + + From + + + + unknown + + + + To + + + + own address + + + + watch-only + + + + label + + + + Credit + + + + matures in %n more block(s) + + + + + + not accepted + + + + Debit + + + + Total debit + + + + Total credit + + + + Transaction fee + + + + Net amount + + + + Message + + + + Comment + + + + Transaction ID + + + + Transaction total size + + + + Output index + + + + Merchant + + + + Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. + + + + Debug information + + + + Transaction + + + + Inputs + + + + Amount + مبلغ + + + true + + + + false + + + TransactionDescDialog This pane shows a detailed description of the transaction این پانل شامل توصیف کاملی از جزئیات تراکنش است - + + Details for %1 + + + TransactionTableModel @@ -1631,7 +3185,113 @@ (no label) (بدون برچسب) - + + Date + تاریخ + + + Type + + + + Open for %n more block(s) + + + + + + Open until %1 + + + + Offline + + + + Unconfirmed + + + + Abandoned + + + + Confirming (%1 of %2 recommended confirmations) + + + + Confirmed (%1 confirmations) + + + + Conflicted + + + + Immature (%1 confirmations, will be available after %2) + + + + This block was not received by any other nodes and will probably not be accepted! + + + + Generated but not accepted + + + + Received with + + + + Received from + + + + Sent to + + + + Payment to yourself + + + + Mined + + + + watch-only + + + + (n/a) + + + + Transaction status. Hover over this field to show number of confirmations. + + + + Date and time that the transaction was received. + + + + Type of transaction. + + + + Whether or not a watch-only address is involved in this transaction. + + + + User-defined intent/purpose of the transaction. + + + + Amount removed from or added to balance. + + + TransactionView @@ -1662,19 +3322,187 @@ Exporting Failed صدور موفق نبود - + + All + + + + Today + + + + This week + + + + This month + + + + Last month + + + + This year + + + + Range... + + + + Received with + + + + Sent to + + + + To yourself + + + + Mined + + + + Other + + + + Enter address or label to search + + + + Min amount + + + + Abandon transaction + + + + Copy raw transaction + + + + Copy full transaction details + + + + Edit label + + + + Show transaction details + + + + Export Transaction History + + + + Comma separated file (*.csv) + + + + Confirmed + تایید شده + + + Watch-only + + + + Date + تاریخ + + + Type + + + + ID + + + + There was an error trying to save the transaction history to %1. + + + + Exporting Successful + + + + The transaction history was successfully saved to %1. + + + + Range: + + + + to + + + UnitDisplayStatusBarControl - + + Unit to show amounts in. Click to select another unit. + + + WalletFrame - + + No wallet has been loaded. + + + WalletModel - + + Send Coins + ارسال سکه + + WalletView - + + &Export + &صدور + + + Export the data in the current tab to a file + خروجی گرفتن داده‌های برگه‌ی فعلی به یک فایل + + + Backup Wallet + + + + Wallet Data (*.dat) + + + + Backup Failed + + + + There was an error trying to save the wallet data to %1. + + + + Backup Successful + + + + The wallet data was successfully saved to %1. + + + bitcoin-core @@ -1827,7 +3655,7 @@ Execute command when the best block changes (%s in cmd is replaced by block hash) - زمانی که بهترین بلاک تغییر کرد، دستور را اجرا کن (%s در cmd با block hash جایگزین شده است) + زمانی که بهترین بلاک تغییر کرد، دستور را اجرا کن (%s در cmd با block hash جایگزین شده است) Allow DNS lookups for -addnode, -seednode and -connect @@ -1842,12 +3670,12 @@ (پیش‌فرض %s) - Invalid -proxy address: '%s' + Invalid -proxy address: '%s' آدرس پراکسی اشتباه %s - Unknown network specified in -onlynet: '%s' - شبکه مشخص شده غیرقابل شناسایی در onlynet: '%s' + Unknown network specified in -onlynet: '%s' + شبکه مشخص شده غیرقابل شناسایی در onlynet: '%s' Insufficient funds @@ -1855,7 +3683,7 @@ Loading block index... - بار گیری شاخص بلوک + بار گیری فهرست بلوک‌ها.... Add a node to connect to and attempt to keep the connection open @@ -1863,7 +3691,7 @@ Loading wallet... - بار گیری والت + بار گیری کیف‌پول Cannot downgrade wallet @@ -1885,5 +3713,785 @@ Error خطا + + The %s developers + + + + Bitcoin Core and Dogecoin Core + + + + (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data) + + + + -discardthreshold is set very high! This is the output amount that the wallet will discard (to fee) if it is smaller than this setting. + + + + -maxtxfee is set very high! Fees this large could be paid on a single transaction. + + + + A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s) + + + + Accept connections from outside (default: 1 if no -proxy or -connect/-noconnect) + + + + Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d) + + + + Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times + + + + Amount under which a transaction output is considered dust, in %s (default: %s) + + + + Amount under which a transaction output is considered non-standard and will not be accepted or relayed, in %s (default: %s) + + + + Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6 + + + + Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces) + + + + Cannot obtain a lock on data directory %s. %s is probably already running. + + + + Connect only to the specified node(s); -noconnect or -connect=0 alone to disable automatic connections + + + + Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) + + + + Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup + + + + Discover own IP addresses (default: 1 when listening and no -externalip or -proxy) + + + + Distributed under the MIT software license, see the accompanying file %s or %s + + + + Do not keep transactions in the mempool longer than <n> hours (default: %u) + + + + Equivalent bytes per sigop in transactions for relay and mining (default: %u) + + + + Error loading %s: You can't enable HD on a already existing non-HD wallet + + + + Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. + + + + Error: Listening for incoming connections failed (listen returned error %s) + + + + Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) + + + + Execute command when the best block changes (%s in cmd is replaced by block hash, %i is replaced by block number) + + + + Extra transactions to keep in memory for compact block reconstructions (default: %u) + + + + Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s) + + + + Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s) + + + + Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d) + + + + How thorough the block verification of -checkblocks is (0-4, default: %u) + + + + If <category> is not supplied or if <category> = 1, output all debugging information. + + + + If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u) + + + + If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s) + + + + Invalid amount for -discardthreshold=<amount>: '%s' (must be at least the dust limit of %s to prevent stuck transactions) + + + + Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) + + + + Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u) + + + + Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds) + + + + Maximum size of data in data carrier transactions we relay and mine (default: %u) + + + + Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s) + + + + Number of seconds to keep misbehaving peers from reconnecting (default: %u) + + + + Output debugging information (default: %u, supplying <category> is optional) + + + + Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. + + + + Please contribute if you find %s useful. Visit %s for further information about the software. + + + + Prune configured below the minimum of %d MiB. Please use a higher number. + + + + Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) + + + + Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect/-noconnect) + + + + Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u) + + + + Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB) + + + + Rescans are not possible in pruned mode. You will need to use -reindex which will download the whole blockchain again. + + + + Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s) + + + + Set maximum size of high-priority/low-fee transactions in bytes (default: %d) + + + + Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) + + + + Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d) + + + + Support filtering of blocks and transaction with bloom filters (default: %u) + + + + The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct + + + + The minimum transaction output size (in %s) used to validate wallet transactions and discard change (to fee) (default: %s) + + + + The transaction amount is too small to send after the fee has been deducted + + + + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications + + + + This is the transaction fee you may pay when fee estimates are not available. + + + + This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit %s and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. Paper wallet art provided by Anacoluthia. + + + + Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. + + + + Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d) + + + + Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain + + + + Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported. + + + + Unsupported argument -whitelistalwaysrelay ignored, use -whitelistrelay and/or -whitelistforcerelay. + + + + Use UPnP to map the listening port (default: 1 when listening and no -proxy) + + + + Use hierarchical deterministic key generation (HD) after BIP32. Only has effect during wallet creation/first start + + + + Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s) + + + + Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times + + + + Wallet will not create transactions that violate mempool chain limits (default: %u) + + + + Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. + + + + Warning: Unknown block versions being mined! It's possible unknown rules are in effect + + + + Warning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup. + + + + Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. + + + + Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times. + + + + Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway + + + + You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain + + + + You need to rebuild the database using -reindex-chainstate to change -txindex + + + + %s corrupt, salvage failed + + + + %s is set very high! + + + + -maxmempool must be at least %d MB + + + + <category> can be: + + + + Accept public REST requests (default: %u) + + + + Always query for peer addresses via DNS lookup (default: %u) + + + + Amaze + + + + Append comment to the user agent string + + + + Attempt to recover private keys from a corrupt wallet on startup + + + + Automatically create Tor hidden service (default: %d) + + + + Cannot resolve -%s address: '%s' + + + + Chain selection options: + + + + Change index out of range + + + + Connect through SOCKS5 proxy + + + + Debugging/Testing options: + + + + Default + + + + Do not load the wallet and disable wallet RPC calls + + + + Enable publish hash block in <address> + + + + Enable publish hash transaction in <address> + + + + Enable publish raw block in <address> + + + + Enable publish raw transaction in <address> + + + + Enable transaction replacement in the memory pool (default: %u) + + + + Error initializing wallet database environment %s! + + + + Error loading %s: Wallet corrupted + + + + Error loading %s: Wallet requires newer version of %s + + + + Error loading %s: You can't disable HD on a already existing HD wallet + + + + Error reading from database, shutting down. + + + + Error: A fatal internal error occurred, see debug.log for details + + + + Fee (in %s/kB) to add to transactions you send (default: %s) + + + + How many blocks to check at startup (default: %u, 0 = all) + + + + Imports blocks from external blk000??.dat file on startup + + + + Include IP addresses in debug output (default: %u) + + + + Incorrect or no genesis block found. Wrong datadir for network? + + + + Initialization sanity check failed. %s is shutting down. + + + + Invalid -onion address: '%s' + + + + Invalid amount for -%s=<amount>: '%s' + + + + Invalid amount for -fallbackfee=<amount>: '%s' + + + + Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) + + + + Invalid netmask specified in -whitelist: '%s' + + + + Keep at most <n> unconnectable transactions in memory (default: %u) + + + + Keep the transaction memory pool below <n> megabytes (default: %u) + + + + Keypool ran out, please call keypoolrefill first + + + + Listen for JSON-RPC connections on <port> (default: %u or testnet: %u) + + + + Listen for connections on <port> (default: %u or testnet: %u) + + + + Location of the auth cookie (default: data dir) + + + + Maintain at most <n> connections to peers (default: %u) + + + + Make the wallet broadcast transactions + + + + Many generous + + + + Maximum per-connection receive buffer, <n>*1000 bytes (default: %u) + + + + Maximum per-connection send buffer, <n>*1000 bytes (default: %u) + + + + Minimum + + + + More + + + + Need to specify a port with -whitebind: '%s' + + + + Node relay options: + + + + Not enough file descriptors available. + + + + Only connect to nodes in network <net> (ipv4, ipv6 or onion) + + + + Prepend debug output with timestamp (default: %u) + + + + Prune cannot be configured with a negative value. + + + + Prune mode is incompatible with -txindex. + + + + Pruning blockstore... + + + + RPC server options: + + + + Rebuild chain state and block index from the blk*.dat files on disk + + + + Rebuild chain state from the currently indexed blocks + + + + Receive and display P2P network alerts (default: %u) + + + + Reducing -maxconnections from %d to %d, because of system limitations. + + + + Relay and mine data carrier transactions (default: %u) + + + + Relay non-P2SH multisig (default: %u) + + + + Rescan the block chain for missing wallet transactions on startup + + + + Rewinding blocks... + بازگردانی بلاک‌ها... + + + Send transactions as zero-fee transactions if possible (default: %u) + + + + Send transactions with full-RBF opt-in enabled (default: %u) + + + + Set database cache size in megabytes (%d to %d, default: %d) + + + + Set key pool size to <n> (default: %u) + + + + Set maximum BIP141 block weight (default: %d) + + + + Set maximum block size in bytes (default: %d) + + + + Set the number of threads to service RPC calls (default: %d) + + + + Show all debugging options (usage: --help -help-debug) + + + + Signing transaction failed + + + + Specify configuration file (default: %s) + + + + Specify connection timeout in milliseconds (minimum: 1, default: %d) + + + + Specify pid file (default: %s) + + + + Specify wallet file (within data directory) + + + + Spend unconfirmed change when sending transactions (default: %u) + + + + Starting network threads... + + + + Such expensive + + + + The source code is available from %s. + + + + The transaction amount is too small to pay the fee + + + + The wallet will avoid paying less than the minimum relay fee. + + + + This is experimental software. + + + + This is the minimum transaction fee you pay on every transaction. + + + + This is the transaction fee you will pay if you send a transaction. + + + + Threshold for disconnecting misbehaving peers (default: %u) + + + + Tor control port password (default: empty) + + + + Tor control port to use if onion listening enabled (default: %s) + + + + Transaction amounts must not be negative + + + + Transaction has too long of a mempool chain + + + + Transaction must have at least one recipient + + + + Transaction too large for fee policy + + + + Unable to bind to %s on this computer (bind returned error %s) + + + + Unable to bind to %s on this computer. %s is probably already running. + + + + Unable to start HTTP server. See debug log for details. + + + + Unsupported argument -benchmark ignored, use -debug=bench. + + + + Unsupported argument -debugnet ignored, use -debug=net. + + + + Unsupported argument -tor found, use -onion. + + + + Upgrade wallet to latest format on startup + + + + Use Namecoin-compatible AuxPow API structure, (default: %u) + + + + Use UPnP to map the listening port (default: %u) + + + + Use the test chain + + + + User Agent comment (%s) contains unsafe characters. + + + + Wallet %s resides outside data directory %s + + + + Wallet debugging/testing options: + + + + Wallet needed to be rewritten: restart %s to complete + + + + Whether to operate in a blocks only mode (default: %u) + + + + Wow + + + + Zapping all transactions from wallet... + + + + ZeroMQ notification options: + + - \ No newline at end of file +