Refactor a common way to perform the failed migration test that exists
for default wallets, and add relative-path wallets and absolute-path
wallets.
Github-Pull: 34226
Rebased-From: eeaf28dbe0e09819ab0e95bb7762b29536bdeef6
Because the default wallet has no name, the watch-only and solvables
wallets created during migration end up having no name either.
This fixes it by applying the same prefix name we use for the backup
file for an unnamed default wallet.
Before: watch-only wallet named "_watchonly"
After: watch-only wallet named "default_wallet_watchonly"
Github-Pull: bitcoin/bitcoin#34156
Rebased-From: 82caa8193a3e36f248dcc949e0cd41def191efac
The first test verifies that restoring into an existing empty directory
or a directory with no .dat db files succeeds, while restoring into a
dir with a .dat file fails.
The second test covers restoring into the default unnamed wallet
(wallet.dat), which also implicitly exercises the recovery path used
after a failed migration.
The third test covers failure during restore on a prune node. When
the wallet last sync was beyond the pruning height.
Github-Pull: bitcoin/bitcoin#34156
Rebased-From: f011e0f0680a8c39988ae57dae57eb86e92dd449
Verifies that a failed migration of the unnamed (default) wallet
does not erase the main /wallets/ directory, and also that the
backup file exists.
Github-Pull: bitcoin/bitcoin#34156
Rebased-From: 36093bde63286e19821a9e62cdff1712b6245dc7
When migrating any legacy unnamed wallet, a failed migration would
cause the cleanup logic to remove its parent directory. Since this
type of legacy wallet lives directly in the main '/wallets/' folder,
this resulted in unintentionally erasing all wallets, including the
backup file.
To be fully safe, we will no longer call `fs::remove_all`. Instead,
we only erase the individual db files we have created, leaving
everything else intact. The created wallets parent directories are
erased only if they are empty.
As part of this last change, `RestoreWallet` was modified to allow
an existing directory as the destination, since we no longer remove
the original wallet directory (we only remove the files we created
inside it). This also fixes the restore of top-level default wallets
during failures, which were failing due to the directory existence
check that always returns true for the /wallets/ directory.
This bug started after:
f6ee59b6e2
Previously, the `fs::copy_file` call was failing for top-level wallets,
which prevented the `fs::remove_all` call from being reached.
Github-Pull: bitcoin/bitcoin#34156
Rebased-From: f4c7e28e80bf9af50b03a770b641fd309a801589
This aims to complete our test framework BDB parser to reflect
our read-only BDB parser in the wallet codebase. This could be
useful both for making review of #26606 easier and to also possibly
improve our functional tests for the BDB parser by comparing with
an alternative implementation.
Github-Pull: #30125
Rebased-From: 01ddd9f646a5329a92341bb216f3757fa97c0709
Let's say an attacker wants to use/exhaust the network's bandwidth, and
has the choice between renting resources from a commercial provider and
getting the network to "spam" itself it by sending unconfirmed
transactions. We'd like the latter to be more expensive than the former.
The bandwidth for relaying a transaction across the network is roughly
its serialized size (plus relay overhead) x number of nodes. A 1000vB
transaction is 1000-4000B serialized. With 100k nodes, that's 0.1-0.4GB
If the going rate for commercial services is 10c/GB, that's like 1-4c per kvB
of transaction data, so a 1000vB transaction should pay at least $0.04.
At a price of 120k USD/BTC, 100sat is about $0.12. This price allows us
to tolerate a large decrease in the conversion rate or increase in the
number of nodes.
Github-Pull: #33106
Rebased-From: 6da5de58cabc4133c379baa50845e30e5bc6b3e4
Back when we implemented coin age priority as a miner policy, miners
mempools might admit transactions paying very low fees, but then want to
set a higher fee for block inclusion. However, since coin age priority
was removed in v0.15, the block assembly policy is solely based on fees,
so we do not need to apply minimum feerate rules in multiple places. In
fact, the block assembly policy ignoring transactions that are added to
the mempool is likely undesirable as we waste resources accepting and
storing this transaction.
Instead, rely on mempool policy to enforce a minimum entry feerate to
the mempool (minrelaytxfee). Set the minimum block feerate to the
minimum non-zero amount (1sat/kvB) so it collects everything it finds in
mempool into the block.
Github-Pull: #33106
Rebased-From: 5f2df0ef78be7b24798d0983c9b962740608f1f4
log.exception is more verbose and useful to debug timeouts.
Also, log stderr for CalledProcessError to make debugging easier.
Github-Pull: #33001
Rebased-From: faa3e684118bffa7a98cf76eeeb59243219df900
This adds a missing catch for BaseException (e.g. SystemExit), which
would otherwise be silently ignored.
Also, remove the redundant other catches, which are just calling
log.exception with a redundant log message.
Github-Pull: #33001
Rebased-From: fa30b34026f76a5b8af997152fced2d281782e0d
After port collisions are no longer tolerated but lead to
a startup failure in v28.0, local setups of multiple nodes,
each with a different -port value would not be possible anymore
due to collision of the onion default port - even if the nodes
were using tor or not interested in receiving onion inbound connections.
Fix this by deriving the onion listening port to be -port + 1.
(idea by vasild / laanwj)
Co-authored-by: Vasil Dimov <vd@FreeBSD.org>
Github-Pull: bitcoin/bitcoin#31223
Rebased-From: 0e2b12b92a28a2949e75bf50f31563f52e647d6e
Fixes a race between node 1 catching up with the chain and mining a
new block in the sanity_check_rbf_estimates subtest.
Github-Pull: #31016
Rebased-From: a1576edab356053c4c736691e4950b58e9a14f76
Exercising and verifying the following points:
1. An IBD node can sync headers from an AssumeUTXO node at
any time.
2. IBD nodes do not request historical blocks from AssumeUTXO
nodes while they are syncing the background-chain.
3. The assumeUTXO node dynamically adjusts the network services
it offers according to its state.
4. IBD nodes can fully sync from AssumeUTXO nodes after they
finish the background-chain sync.
Github-Pull: bitcoin/bitcoin#30807
Rebased-From: 992f83bb6f4b29b44f4eaace1d1a2c0001d43cac
Because AssumeUTXO nodes prioritize tip synchronization, they relay their local
address through the network before completing the background chain sync.
This, combined with the advertising of full-node service (NODE_NETWORK), can
result in an honest peer in IBD connecting to the AssumeUTXO node (while syncing)
and requesting an historical block the node does not have. This behavior leads to
an abrupt disconnection due to perceived unresponsiveness (lack of response)
from the AssumeUTXO node.
This lack of response occurs because nodes ignore getdata requests when they do
not have the block data available (further discussion can be found in PR 30385).
Fix this by refraining from signaling full-node service support while the
background chain is being synced. During this period, the node will only
signal 'NODE_NETWORK_LIMITED' support. Then, full-node ('NODE_NETWORK')
support will be re-enabled once the background chain sync is completed.
Github-Pull: bitcoin/bitcoin#30807
Rebased-From: 6d5812e5c852c233bd7ead2ceef051f8567619ed
fa5b58ea01fac1adb6336b8b6b5217193295c695 test: Avoid intermittent block download timeout in p2p_ibd_stalling (MarcoFalke)
Pull request description:
Fixes#30704
The goal of the test is to check the stalling timeout, not the block download timeout.
On extremely slow hardware (for example qemu virtual hardware), downloading the 1023 blocks may take longer than the block download timeout.
Fix it by pinning the time using mocktime, and only advance it when testing the stalling timeout.
ACKs for top commit:
tdb3:
CR ACK fa5b58ea01fac1adb6336b8b6b5217193295c695
brunoerg:
utACK fa5b58ea01fac1adb6336b8b6b5217193295c695
Tree-SHA512: 9a9221f264bea52be5e9fe81fd319f5a6970cd315cc5e9f5e2e049c5d84619b19b9f6f075cda8d34565c2d6c17a88fb57e195c66c271e40f73119a77caecb6d7
e1d5dd732d5dc641faf1dde316275c84b6bb224b test: check xor.dat recreated when missing (tdb3)
d1610962bf1ff14df45c57cc1d2e075f71fcd19a test: add null block xor key (tdb3)
1ad999b9da39b60e16c51f9813f4fd39b7bdc2b9 refactor: lift NUM_XOR_BYTES (tdb3)
d8399584dd59b3954a0bea393b2de350a732055e refactor: move read_xor_key() to TestNode (tdb3)
d43948c3ef610c383176bf9b389697973bd0ad64 refactor: use unlink rather than os.remove (tdb3)
c8176f758b5991c3797c32ee519d32c14b444991 test: add blocks_key_path (tdb3)
Pull request description:
Builds on PR #30657.
Refactors `read_xor_key()` from `util.py` to `test_node.py` (comment https://github.com/bitcoin/bitcoin/pull/30657#discussion_r1723358327)
Adds a check that `xor.dat` is created when missing (comment https://github.com/bitcoin/bitcoin/pull/30657#discussion_r1717724161)
Help states:
```
-blocksxor
Whether an XOR-key applies to blocksdir *.dat files. The created XOR-key
will be zeros for an existing blocksdir or when `-blocksxor=0` is
set, and random for a freshly initialized blocksdir. (default: 1)
```
ACKs for top commit:
maflcko:
ACK e1d5dd732d5dc641faf1dde316275c84b6bb224b
achow101:
ACK e1d5dd732d5dc641faf1dde316275c84b6bb224b
theStack:
re-ACK e1d5dd732d5dc641faf1dde316275c84b6bb224b
brunoerg:
reACK e1d5dd732d5dc641faf1dde316275c84b6bb224b
Tree-SHA512: 325912ef646ec88e0a58e1ece263a2b04cbc06497e8fe5fcd603e509e80c6bcf84b09dd52dfac60e23013f07fc2b2f6db851ed0598649c3593f452c4a1424bd9
fa5aeab3cb18405ecf8a1401d89539b924a618f6 test: Avoid duplicate curl call in get_previous_releases.py (MarcoFalke)
Pull request description:
Seems odd having to translate `404` to "Binary tag was not found". Also, it seems odd to write a for-loop over a list with one item.
Fix both issues by just using a single call to `curl --fail ...`.
Can be tested with: `test/get_previous_releases.py -b v99.99.99`
Before:
```
Releases directory: releases
Fetching: https://bitcoincore.org/bin/bitcoin-core-99.99.99/bitcoin-99.99.99-x86_64-linux-gnu.tar.gz
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 286k 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0
Binary tag was not found
```
After:
```
Releases directory: releases
Fetching: https://bitcoincore.org/bin/bitcoin-core-99.99.99/bitcoin-99.99.99-x86_64-linux-gnu.tar.gz
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 286k 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0
curl: (22) The requested URL returned error: 404
ACKs for top commit:
fanquake:
ACK fa5aeab3cb18405ecf8a1401d89539b924a618f6
brunoerg:
utACK fa5aeab3cb18405ecf8a1401d89539b924a618f6
tdb3:
tested ACK fa5aeab3cb18405ecf8a1401d89539b924a618f6
Tree-SHA512: d5d31e0bccdd9de9b4a8ecf2e69348f4e8cee773050c8259b61db1ce5de73f6fbfffbe8c4d2571f7bef2de29cb42fd244573deebfbec614e487e76ef41681b9c
cccc5bfd35a008adf08d99ed463fe00d6a6f29c0 test: Enable detect_leaks=1 in ASAN_OPTIONS explicitly (MarcoFalke)
Pull request description:
It should be enabled by default, but being explicit can't hurt.
ACKs for top commit:
fanquake:
ACK cccc5bfd35a008adf08d99ed463fe00d6a6f29c0
Tree-SHA512: ed284abd05c7a99c30b509844aa75785a5ccb506d8296a71347b4c328750a6a4ed1f87e7a3ec36ab17f27b467c033cc8ca5eb5e2b951f2ae7473327c5eb1ddae
